{"id":177,"date":"2016-11-02T09:28:45","date_gmt":"2016-11-02T07:28:45","guid":{"rendered":"http:\/\/bridge87.qodeinteractive.com\/?page_id=177"},"modified":"2026-03-23T18:13:40","modified_gmt":"2026-03-23T16:13:40","slug":"useful","status":"publish","type":"page","link":"https:\/\/tdm-plast.com\/en\/useful\/","title":{"rendered":"Useful Info"},"content":{"rendered":"
<\/div><\/div><\/div>
\t
\n\t\t\t<\/span>\n\t\t<\/span><\/div>\n\n\n\t
\n\t\t
\n\t\t\t

In recent years, a clear trend has emerged for the mass replacement of existing wooden window frames in homes with new PVC and Aluminum ones. Therefore, we will briefly introduce you to the operation and maintenance of this type of joinery.<\/p>\n

\u041d\u0430\u0441\u0442\u043e\u044f\u0449\u0430\u0442\u0430 \u0438\u043d\u0441\u0442\u0440\u0443\u043a\u0446\u0438\u044f \u0437\u0430 \u0435\u043a\u0441\u043f\u043b\u043e\u0430\u0442\u0430\u0446\u0438\u044f \u043d\u0430 \u041f\u0412\u0426 \u0438 \u0410\u043b\u0443\u043c\u0438\u043d\u0438\u0435\u0432\u0430 \u0434\u043e\u0433\u0440\u0430\u043c\u0430, \u0412\u0438 \u043f\u0440\u0435\u0434\u043b\u0430\u0433\u0430 \u043d\u044f\u043a\u043e\u0438 \u0443\u043a\u0430\u0437\u0430\u043d\u0438\u044f \u0437\u0430 \u043f\u043e\u0434\u0434\u044a\u0440\u0436\u0430\u043d\u0435 \u0438 \u043f\u0440\u043e\u0432\u0435\u0442\u0440\u044f\u0432\u0430\u043d\u0435, \u0442\u0430\u043a\u0430 \u0447\u0435 \u043f\u043e\u043b\u0437\u0432\u0430\u043d\u0435\u0442\u043e \u043d\u0430 \u043f\u0440\u043e\u0437\u043e\u0440\u0446\u0438\u0442\u0435 \u0434\u0430 \u0441\u0435 \u043f\u0440\u0435\u0432\u044a\u0440\u043d\u0435 \u0432 \u0438\u0441\u0442\u0438\u043d\u0441\u043a\u043e \u0438 \u0442\u0440\u0430\u0439\u043d\u043e \u0443\u0434\u043e\u0432\u043e\u043b\u0441\u0442\u0432\u0438\u0435 \u0437\u0430 \u0412\u0430\u0441.<\/p>\n\n\t\t<\/div> \n\t<\/div> \t

\n\t\t\t<\/span>\n\t\t<\/span><\/div>\n\n\n\t
\n\t\t
\n\t\t\t

WARNING!\u00a0<\/strong><\/h4>\n

After the installation of the window frames, under no circumstances should you remove the wooden shims (spacers) located between the masonry and the frame. They ensure the flawless functioning of the window sashes. These shims must remain embedded within the plaster.<\/p>\n

It is recommended to clean the bottom frame using a vacuum cleaner, as any metal shavings left behind after installation can cause rust spots to appear.<\/p>\n\n\t\t<\/div> \n\t<\/div> \t

\n\t\t\t<\/span>\n\t\t<\/span><\/div>\n\n<\/div><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>
\n
\n
\n \n \"qode-eliptic-slider\"\/\n <\/span>\n <\/div>\n
\n
\n
\n
\n\t\t\t\t\t
\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\n\t\t\t\t\t\t<\/svg>\n\t\t\t\t\t<\/div>\n
\n\n\t\t\t\t\t\t\n\t
\n\t\t
\n\t\t\t

Operation & Maintenance<\/span><\/h2>\n\n\t\t<\/div> \n\t<\/div> \t
\n\t\t\t<\/span>\n\t\t<\/span><\/div>\n\n\n\t
\n\t\t
\n\t\t\t

Ensure that the window handle is always in one of the three main positions: vertically upwards, horizontal, or vertically downwards. Leaving the handle in an intermediate position can cause an incorrect opening. It is possible that, while in the tilt position (top-open), the sash might also pivot on its vertical axis. Do not panic. The so-called \"scissor\" hinge of the hardware securely holds the sash at the top. Move the handle upwards (the tilt position), press the sash closed, and then turn the handle to the horizontal position (vertical axis opening). This usually happens when a so-called \"mishandling device\" (safety lock) has not been installed on the window.<\/p>\n\n\t\t<\/div> \n\t<\/div> <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n<\/div>\n

\n
\n \n \"qode-eliptic-slider\"\/\n <\/span>\n <\/div>\n
\n
\n
\n
\n\t\t\t\t\t
\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\n\t\t\t\t\t\t<\/svg>\n\t\t\t\t\t<\/div>\n
\n\n\t\t\t\t\t\t\n\t
\n\t\t
\n\t\t\t

Window Cleaning & Care<\/span><\/h2>\n\n\t\t<\/div> \n\t<\/div> \t
\n\t\t\t<\/span>\n\t\t<\/span><\/div>\n\n\n\t
\n\t\t
\n\t\t\t

To ensure the long-term preservation of sensitive surfaces, careful cleaning and maintenance are essential. In many areas, high air pollution leads to stubborn stains that are difficult to remove. To prevent heavy buildup and to clean heavily soiled surfaces, we recommend regular cleaning with specialized PVC window detergents.\n\nIt is absolutely necessary to avoid the use of abrasive cleaners and dry wiping with a cloth. Cleaning and polishing agents containing solvents\u2014specifically nail polish remover, nitro-thinners, or so-called \"plastic cleaners\"\u2014should not be used.\n\nNormally soiled frames and sashes can be easily cleaned with lukewarm water and a small amount of dishwashing liquid.<\/p>\n\n\t\t<\/div> \n\t<\/div> <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n<\/div>\n

\n
\n \n \"qode-eliptic-slider\"\/\n <\/span>\n <\/div>\n
\n
\n
\n
\n\t\t\t\t\t
\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\n\t\t\t\t\t\t<\/svg>\n\t\t\t\t\t<\/div>\n
\n\n\t\t\t\t\t\t\n\t
\n\t\t
\n\t\t\t

Glass Cleaning & Care<\/span><\/h2>\n\n\t\t<\/div> \n\t<\/div> \t
\n\t\t\t<\/span>\n\t\t<\/span><\/div>\n\n\n\t
\n\t\t
\n\t\t\t

They are best cleaned with lukewarm water or a glass cleaner, avoiding the use of corrosive agents or those containing solvents. Unlike old single-pane glass, everything seen through new double-glazed units appears without distortion, thanks to their exceptionally flat surface.\n\nOccasionally, at a certain angle of sunlight refraction, rainbow-colored patterns (interference) may be visible on the glass. This physical phenomenon is not a defect and does not constitute grounds for a warranty claim.<\/p>\n\n\t\t<\/div> \n\t<\/div> <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n<\/div>\n

\n
\n \n \"qode-eliptic-slider\"\/\n <\/span>\n <\/div>\n
\n
\n
\n
\n\t\t\t\t\t
\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\n\t\t\t\t\t\t<\/svg>\n\t\t\t\t\t<\/div>\n
\n\n\t\t\t\t\t\t\n\t
\n\t\t
\n\t\t\t

Seals & Gaskets<\/span><\/h2>\n\n\t\t<\/div> \n\t<\/div> \t
\n\t\t\t<\/span>\n\t\t<\/span><\/div>\n\n\n\t
\n\t\t
\n\t\t\t

The seals along the frame and the sash also need to be cleaned of dust and other contaminants. In the event that a seal slips out of its groove, simply press it back in with your thumb, starting from the point where it is still seated in the channel. Avoid using sharp objects, as these can damage the seal.<\/p>\n\n\t\t<\/div> \n\t<\/div> <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n<\/div>\n

\n
\n \n \"qode-eliptic-slider\"\/\n <\/span>\n <\/div>\n
\n
\n
\n
\n\t\t\t\t\t
\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\n\t\t\t\t\t\t<\/svg>\n\t\t\t\t\t<\/div>\n
\n\n\t\t\t\t\t\t\n\t
\n\t\t
\n\t\t\t

Condensation<\/span><\/h2>\n\n\t\t<\/div> \n\t<\/div> \t
\n\t\t\t<\/span>\n\t\t<\/span><\/div>\n\n\n\t
\n\t\t
\n\t\t\t

It is a common occurrence that after installing new windows, mould may form on walls behind furniture, behind pictures, or in the corners of exterior walls. This undesirable phenomenon is caused by the accumulation of moisture within the rooms. Unlike old windows, which provided forced ventilation due to poor sealing, modern windows create an airtight seal that eliminates this uncontrolled air exchange.\n\nUnder certain climatic conditions, both the glass and the frame may experience condensation (sweating). This is explained by the fact that warm air can hold much more moisture than cold air. When warm air meets a cooler surface, it cools down, and the excess moisture that cannot be absorbed at this lower temperature is deposited as condensation. This is most frequently observed when high indoor humidity levels combine with low outdoor temperatures.\n\nThe primary solution for preventing this phenomenon is proper and regular ventilation.<\/p>\n\n\t\t<\/div> \n\t<\/div> <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n<\/div>\n

\n
\n \n \"qode-eliptic-slider\"\/\n <\/span>\n <\/div>\n
\n
\n
\n
\n\t\t\t\t\t
\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\n\t\t\t\t\t\t<\/svg>\n\t\t\t\t\t<\/div>\n
\n\n\t\t\t\t\t\t\n\t
\n\t\t
\n\t\t\t

Ventilation<\/span><\/h2>\n\n\t\t<\/div> \n\t<\/div> \t
\n\t\t\t<\/span>\n\t\t<\/span><\/div>\n\n\n\t
\n\t\t
\n\t\t\t

Regularly ventilating rooms prevents an increase in air humidity and, consequently, the potential formation of mold. Brief but intensive ventilation\u2014ideally by creating a cross-draft by opening all windows\u2014can completely exchange the air in a room in about 5 minutes. Prolonged ventilation unnecessarily cools down the interior walls and is energy-inefficient.\n\nDuring ventilation, windows should be wide open while the heating is turned off. Only after closing them should you turn the heating back on. Leaving a window slightly ajar continuously does not achieve sufficient ventilation. Humid air from one room should never be vented into another; it must always be \"released\" outside. The fogging or condensation of windows is a signal that the room needs to be ventilated, as the air humidity has increased. Through proper ventilation, you will simultaneously ensure a comfortable climate for the occupants.<\/p>\n\n\t\t<\/div> \n\t<\/div> <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n<\/div>\n

\n
\n \n \"qode-eliptic-slider\"\/\n <\/span>\n <\/div>\n
\n
\n
\n
\n\t\t\t\t\t
\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\n\t\t\t\t\t\t<\/svg>\n\t\t\t\t\t<\/div>\n
\n\n\t\t\t\t\t\t\n\t
\n\t\t
\n\t\t\t

Hardware<\/span><\/h2>\n\n\t\t<\/div> \n\t<\/div> \t
\n\t\t\t<\/span>\n\t\t<\/span><\/div>\n\n\n\t
\n\t\t
\n\t\t\t

The hardware can be adjusted to ensure perfect operation. However, this must be performed by a specialist \u2013 only a qualified technician can accurately assess and implement the necessary adjustments. To function correctly over time, the hardware also requires regular cleaning and lubrication.<\/p>\n

 <\/p>\n

Attention!<\/strong><\/p>\n

Under no circumstances should you prop windows open or place wooden blocks or other objects between the sash and the frame to prevent them from slamming. Doing so can lead to serious damage to the hardware and cause the window to malfunction.<\/p>\n\n\t\t<\/div> \n\t<\/div> <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>